Large 3/4″ Diameter for Strength & Safety – beware inferior 5/8″ diameter steps.
Meet or Exceed ASTM A394 Spec. for Tower Bolts
Charpy Impact Tested & Knurled for Slip-Resistance
Ladder frame provides a secure anchor point for lineman’s lanyards, and high-strength design even allows rigging directly from the ladder frame.
* Load Test Data Available Upon Request.*
When you’re servicing overhead transmission poles in limited access areas, you cant always rely on “bucket” trucks alone. Our made-to-spec, load-tested* climbing devices get you up on the pole in places buckets simply cant reach:
Rough Terrain
Dense Woods
River Crossings
Congested Urban Areas
Restricted R-O-W
Extra High Poles
Climbing Devices for any Job Standard Climbing Ladder types -Steps are staggered for climbing. CL-1: Galvanized Climbing Ladder Assembly, 3′ – 10 1/2″ Leg Spacing (“odd” spacing) CL-2: Weathering Steel Climbing Ladder Assembly, 3′ – 10 1/2″ Leg Spacing (“odd” spacing) CL-3: Galvanized Climbing Ladder Assembly, 2′ – 6″ Leg Spacing ( “even” spacing) CL-4: Weathering Steel Climbing Ladder Assembly, 2′ – 6″ Leg Spacing (“even” spacing)
Standard Working Ladder Types -Steps are adjacent, proving more handholds/footholds for working. WL-1: Galvanized Working Ladder Assembly, 3′ – 10 1/52″ Leg Spacing (“odd” spacing) WL-2: Weathering Steel Working Ladder Assembly, 3′ – 10 1/2″ Leg Spacing (“odd” spacing) WL-3: Galvanized Working Ladder Assembly, 2′ – 6″ Leg Spacing (“even” spacing) WL-4: Weathering Steel Working Ladder Assembly, 2′ – 6″ Leg Spacing (“even” spacing)
CL-1, CL-2, WL-1 and WL-2 are more common designs
Custom Ladders: We’ve built a large variety of custom climbing devices for our customers. We can fabricate brackets or attachments to adapt to your specific fall-prevention, fall-arrest, or other safety hardware. We can work with you to retrofit ladders to your existing structures or replace outdated climbing steps. All of our climbing devices are built with the same emphasis on quality, fast turn-around and top-notch service that goes into every ladder we make.
Accessories: Ladder Clips – We mass produce ladder clips specifically designed for mounting our ladders to steel poles, towers, or any other structure, Available in ASTM A36 (weld to structures to be galvanized), or in ASTM A588 (weathering steel).
Steps Bolts– We frequently carry a large inventory of step bolts, both weathering steel and galvanized. all are made in USA, custom knurled for slip resistance and charpy impact-tested with test reports available.
Need more information? We’d be happy to discuss our manufacturing capability offerings in greater detail with you. Please contact us at 570-378-3808.
We are your best solution for USA made steel pole ladders Ladders your lineman can depend on, service and value you can count on.